Product-Line
pH-Electrodes
pH-Electrode with plastic-shaft for aquariums, garden ponds, soil (dilluted in distilled water).
Requests info@ph-elektroden.ch
Troubleshooting
Do you have questions about your analytical process? We offer consulting to measurement problems or to specific requirements of laboratory electrodes, for example for :
- too short life-span
- clogged diaphragma
- etc.
Requests info@ph-elektroden.ch
Industrial Electrodes
We offer electrodes for different industrial areas:
- Waste water
- Electro-plating
- Swimming pool
- Food Industries
For those requirements there are different types like:
- High temperature electrodes
- Puncture electrodes
- Pre-pressurized electrodes
- Electrodes with PTFE-diaphragm or polymer for highly polluted solutions
- Electrode types with enlarged membranes and sleeve diaphragm for reduced conductivity
Requests info@ph-elektroden.ch
Laboratory Electrodes
Laboratory electrodes with re-fill hole or maintenance-free with gel electrolyte:
- Standard type with or without temperature sensor
- Patented technology with high-speed response time in temperature
- Electrodes with fine tip for extra-small sample sizes
Requests info@ph-elektroden.ch
Connector Possibilities
- Fix-cable in different lengths with BNC
- Banana connector
- Chinch
- PG 13.5
- S 7 laboratory head
- VP6
- MP4
- Etc.
Requests info@ph-elektroden.ch
Redox-Electrodes
Redox-electrodes with platinum or gold as measurement electrode
- Electrode with plastic shaft
- Electrodes with glass shaft and Jtatinum- or gold-wire coil
- Electrodes with glass shaft and platinum- or gold-ring for enlarged measurement surface
Requests info@ph-elektroden.ch
Conductivity Cells
Conductivity cells of platinum for conductivity measurements with cell constants:
- C = 10
- C = 1
- C = 0,1
Requests info@ph-elektroden.ch
Potentiostatic Electrodes
Potentiostatic electrodes with double-ring of platinum or gold for chlorine measurements.
Requests info@ph-elektroden.ch
OEM-Products
- We are specialized in OEM-products (Original Equipment Manufacturer)
- We produce electrochemical sensors (pH/ORP/Conductivity) for electronic equipment manufacturers and re-sellers worldwide .
- Our electrodes are being used in laboratory, industry, water treatment plants and swimming pools .
- The sensors contain design, labelling and packaging upon customer request and can be designed individually.
Requests info@ph-elektroden.ch
Product Samples
pH-Electrode and 1 m cable BNC
- Length 100 mm or 120 mm (below the head)
- Full glass body
- PG 13.5
- 1 m fix-cable and BNC-connector
- Ideal for swimming pools
Order number sw703
Redox-electrode and 1 m BNC
- Length 100 mm or 120 mm (below the head)
- Full glass body
- PG 13.5
- 1 m fix-cable and BNC-connector
- Ideal for swimming pool
Order number sw706
Reference-electrode
- Length 100 mm or 120 mm (below the head)
- Full glass body
- PG 13.5
- 1 m fix-cable with BNC-connector
Order number sw702
Whirlpool Redox
- Redox-electrode
- Length 20 mm (below the head)
- Plastic body
- PG 13.5
- 1 m fix-cable and BNC-connector
Order number sw707
Whirlpool pH
- pH-electrode
- Length 20 mm (below the head)
- Plastic body
- PG 13.5
- 1 m fix-cable and BNC-connector
Order number sw707
Conductivity Cell
- Length 100 mm or 120 mm (below the head)
- Full glass body
- 1 m fix-cable with banana connector 4 mm or 2 mm
- Ideal for sea-water or swimming pool
Order number sw704
Plastic body electrode pH
- Plastic body electrode pH
- pH-electrode
- Length 100 mm or 120 mm (below the head)
- Plastic body
- PG 13.5
- Ideal for garden pond, aquarium or swimming pool
Order number sw704
Plastic body Redox
- Redox-electrode
- Length 100 mm or 120 mm (below the head)
- Plastic body
- PG 13.5
- Ideal for garden pond, aquarium or swimming pool
Order number sw705
Classic Laboratory Electrode
- pH-Electrode
- Universal laboratory electrode with re-fill hole for 3M KCl-solution
- S7 head
- Standard laboratory electrode
- pH 0…14, -5…100°C
- Ideal for chemistry, pharmacy and food industry
Order number 101
Laboratory Electrode for small sample volumes for chemistry, pharmacy and food industry
- pH-Micro-electrode with re-fill hole for 3M KCl
- ø 6 mm, immersion depth until 100 mm possible
- Specialized for small sample volume
- pH 0…14, -5…100°C
Order number 102
Electrode cable BNC
• Electrode cable 1 m with BNC- and electrode connector
Order number 110
Electrode cable DIN
- Electrode cable 1 m with DIN and electrode connector
Order number 116
Industry Electrode for waste water
- pH-electrode
- with electrolyte bridge and open circular diaphragm
- Polymeric reference system
- pH 0…14, -5…100°C
Order number 207
Classic Laboratory Electrode
- pH-electrode
- with cable and re-fill hole for 3M KCl-solution
- Standard Laboratory electrode
- 1 m fix-cable and BNC-connector
- pH 0…14, -5…100°C
- Ideal for chemistry, pharmacy and food industry
Order number 301
Measurement in low conductivity solutions and drinking water
- pH-electrode
- with sleeve diaphragm and re-fill hole
- pH 0…14, 0…60°C
- 1 m cable with BNC
Order number 302
pH-electrode for difficult measurements
- pH-electrode
- dirt-repellent PTFE-diaphragm
- 1 m cable with BNC-connector
- pH 0…14, -5…80°C
- Ideal for contaminated solutions
Order number 303
Laboratory electrode for aquariums and common purposes
- pH-electrode with plastic body
- no refill-hole
- 1 m cable with BNC-connector
- pH 0…14, -5…80+C
Order number 304
Buffer Solutions
pH buffer solutions in 50 ml containers
- pH 4.01
- pH 7.00
- Redox-buffer solution
- 3M KCl-solution
Laboratory electrode for small sample volumes for chemistry, pharmacy and food industry
- pH-microelectrode with re-fill hole for 3M KCl
- ø 3 mm immersion depth until 60 mm possible
- Specialized for extra-small sample volumes
- pH 0…14, -5…100°C
Order number 103
Laborelekrtode für Chemie, Pharmazie und Lebensmittelindustrie
- pH-Kunststoffschaftelektrode
- ohne Nachfüllöffnung
- pH 0 . . . 14 –5 . . . 80 °C
Bestell-Nr. 104
pH-puncture electrode
- With polymeric reference system
- pH 0…14, -5…50°C
- S7 connector head
- Meat, cheese, fruits and vegetables
Order number 105
pH-Industrial Electrode with ceramic diaphragm
- pH-electrode
- with electrolyte bridge for longevity
- Length 120 mm
- PG 13.5 head
- pH 0…14, -5…100°C
Order number 201
ORP Industrial Electrode with ceramic diaphragm
- Redox-electrode with electrolyte bridge for longevity
- Length 120 mm
- PG 13.5 screw thread
- ± 2000 mV –5 . . . 100 °C
Order number 202
pH-Industrial electrode for difficult measurements
- pH-Electrode with PTFE-diaphragm
- PG 13.5 screw thread
- pH 0…14, -5…80°C
Order number 203
Industrial Electrode for high temperatures and heavily polluted waste water
- Special pH-Electrode for all problematic uses in heavily polluted measurement solutions
- pH 0…14, -5…130°C
Order number 206
Fast Combi-pH-Electrode with Temperature Sensor
Fast Combi-pH-Electrode with Temperature Sensor
pH-measuring systems made of glass-electrode, reference electrode and temperature sensor are well known. For the accurate determination of pH-values is essential to simultaneously display the liquid’s temperature. Therefore, the temperature sensor has to be placed not only close to the glass electrode but also close to the measurement solution. With increasing distance between temperature sensor and measurement solution, the waiting time up to temperature stabilisation in the measurement system increases and affects reproducability of the measurement values. This waiting time should be kept as short as possible for an efficient execution of test series. The company Vuille pH-Elektroden AG offers a pH-electrodein in which the temperature sensor is placed below the pH-glassmembrane. The advantage is that it is placed at the outer tip of the electrode and therefore exceptionally suitable for aqueous or partially aqueous media between -30°C and 135°C. The waiting time to temperature stability are reduced up to 40% and allow test series at a shorter time than before.
About us
The Vuille pH-Elektroden AG is an innovative manufacturing company, that produces pH-electrodes, redox-electrodes and conductivity cells for use in laboratory, industry, retail food, water treatment and swimming pool among others.
As company philosophy we produce quality products to a fair price. The company is operative for more than 20 years and offers to the customers a large variety of sensors always attentative intechnological trends and quality. Our customers already have a pH-meter device and would like to put in use the matching electrode or equip their own, self-made measurement devices with new electrodes. Our company offers sensors for following markets : Chemistry, pharmaceutical industry, biotechnology, food (meat, cheese, fruits and vegetables) and beverages, swimming pools, aquariums and waste water treatment.